Refill Instructions

InkTec's award winning refill kits are very simple to use, each one designed specifically per cartridge type. Read below and if you have any questions please call us 0800 0830707.
HP 25 (51625) - HP 49 (51649) Refill Kit Contents

 
As shown in the figure, mount the metal holder on the cartridge cover.  Connect the butterfly screw, and then turn them clockwise until the cover is completely removed.
   Insert the nozzle part of the cartridge into the refill clip, and push the top of the cartridge all the way in until you hear it clicking into place.
   Open the cap of the ink container and connect the ink injection needle.
Insert the injection needle deep into the ink injection inlet of the color indicated in the figure with the needle directed toward the nozzle.

Slowly inject 6ml of ink by pressing the piston of the ink container for about 15 seconds.  Then pull out the ink container. 

◆ Warning 1:  The ink volume specified above is for a completely empty cartridge.◆ Warning 2:  If you inject ink too much or too quickly, it may flow over or leak out.

Connect the supplied suction syringe to the rubber hole on the bottom of the refill clip, and slowly suck out about 0.5ml of ink.  Then remove the syringe. 

◆ Warning:  For the above step, use the syringe without the ink injection needle, and take special care that the withdrawn ink does not flow back into the cartridge.
※ Note:  This procedure is for cleaning the cartridge nozzles to improve print quality.

Remove the cartridge from the refill clip and clean the excessive ink around the nozzle, dabbing the nozzle part of the cartridge on some sheets of soft tissue.

As shown in the figure, reseal the cartridge cover with the supplied tape.  Install the cartridge in the printer, and then run the “cartridge cleaning” process before use. 

※ Note:  If the ink keeps on leaking out of cartridge nozzles after refilling or the printout quality is not good enough, read the “Emergency measures when problems occur after refilling“ at the end of the user manual and take the right steps.